Home > Products > Cadmium Ingot

Cadmium Ingot

Share:

CERTIFICATE OF QUALITY

Introduction 

Cadmium and zinc are found in nature together.It is a good neutron-absorbing metal, made into rods that slow the rate of chain fission reactions in nuclear reactors, and useful in zn-cadmium batteries.Rare elements, symbol Cd.It's silver white.Melting point is 321 ℃.The ratio of material to cadmium in the crust is 1000000:0.1 ~ 1000000:0.5.It is extracted from zinc ore or sulphur-cadmium ore as a by-product and is mostly used to protect other metals from corrosion and rust, such as electroplated steel, iron products, copper, brass and other alloys.Another use is to make a bright yellow pigment called cadmium-yellow, which can be used in advanced paints and paints.

use

Used in the manufacture of alloys: as an alloy group, cadmium can be mixed into many alloys, such as hard copper alloys containing 0.5% ~ 1.0% cadmium, which have high tensile strength and wear resistance.Cadmium (98.65%) nickel (1.35%) alloys are used as bearing materials for aircraft engines.Cadmium is found in many low melting point alloys, with the famous wood fusible alloy containing 12.5% cadmium.

Cadmium has a large thermal neutron capture cross section so alloys containing silver (80%) indium (15%) cadmium (5%) can be used as control rods for atomic reactors.

Cadmium compounds have been widely used in the manufacture of (yellow) pigments, plastic stabilizers, phosphors, insecticides, fungicides, and paints.

Used for electroplating, etc.Cadmium oxidation potential is high, so it can be used as a protective film of iron, steel, copper, widely used in electroplating anticorrosion, but because of its toxicity, this use has a reducing trend.

Rechargeable batteries: nickel-cadmium, silver-cadmium, lithium-cadmium batteries have the advantages of small size and large capacity

Cadmium is used in the manufacture of electrical alloy, such as most of the electrical contact of the electric switch USES the silver cadmium oxide material, has good conductivity, small arc, good welding performance advantages, such as resistance [4], widely used in household electric appliance switches, automotive relays, etc. [5], but as toxic cadmium and by the European Union "discarded electrical and electronic equipment directive (WEEE) and on the limit the use of certain hazardous substances in electrical and electronic equipment directive of two directive (RoHS) , the influence of the silver cadmium oxide gradually in the electric switch is environmental protection material, such as silver tin oxide, silver nickel material replaced.

History

In 1817, Stromell, Germany, separated the brown powder from the impure zinc oxide and heated it with charcoal to produce cadmium.

It was professor of chemistry and medicine at the university of gottingen in Germany who first discovered cadmium.He is also a government-appointed inspector of pharmaceutical manufacturers.It was during his visit to the drugmaker that he noticed problems with zinc-containing drugs that led to his discovery of cadmium in 1817.Because the new metal was found in zinc, it was named Cadmium after Calamine, the zinc ore. The element symbol was Cd.

Cadmium was discovered much later than its Cousins, mercury and zinc.It is more abundant in the earth's crust than mercury, but once it appeared, it attracted people's attention with its strong metallic luster, high specific gravity, special fluidity and ability to dissolve a variety of metals.The content of cadmium in the earth's crust is much less than that of zinc.The metal cadmium is more volatile than zinc, so it escapes earlier than zinc at high temperatures, escaping detection.This means that cadmium is unlikely to have been discovered before zinc.

Distribution of reserves

In nature, mainly sulfur cadmium ore exists;A small amount also exists in zinc ore, so it is a byproduct of zinc smelting.The main mineral of cadmium is sulfur cadmium ore (CdS), which is stored in zinc ore, lead-zinc ore and copper lead-zinc ore.The world's reserves of cadmium are estimated at 9 million tons.

Asia is the world's largest producer of primary cadmium, mainly in China, South Korea and Japan.

In 2011, due to the impact of the earthquake in northeast Japan, several major cadmium production bases in Japan were temporarily closed. In 2012, the gradual resumption of related Japanese enterprises promoted the growth of global cadmium production, which was estimated to be 23,000 tons in 2012.

According to global mineral statistics released by the U.S. geological survey in January 2013, China produced 7,000 tons of cadmium in 2012, accounting for 30.43% of the global total.North Korea produced 4,100 tons of cadmium in 2012, accounting for 17.83 percent of the world's total.

Company profile

Anyang daguan metal co., ltd. was established in 2006, specializing in the production of metallurgical accessories.After more than 10 years of efforts and development, has become a domestic rapid development, larger, stable quality, trusted by customers of the benchmark ferroalloy industry enterprises.

5dc694262e0e2.jpgIn 2012, our company obtained export license.The company has 10 sets of intermediate frequency furnace and 4 core wire production lines, with an annual output of more than 20,000 tons of auxiliary materials for steelmaking and casting.Mainly includes the ferroalloy (ferrosilicon, calcium silicon, silicon barium, calcium silicon, silicon barium aluminum, high silicon aluminum barium calcium, calcium silicon manganese, silicon, silicon carbide and carbon recarburizer), nodulizing agent (rare earth silicon magnesium alloy), nucleating agent (silicone, barium, calcium, zirconium, etc.), deoxidizer (aluminum and calcium), alloy ball (silicon, silicon, silicon carbide ball), alloy slag slag (ferrosilicon, silicon slag, rich manganese slag) and packet core.With excellent production equipment, strong technical force, advanced production technology and unique formula, the product ingredient content can be produced in strict accordance with customer requirements, in use with high efficiency, stable reaction, absorption and fusion of good characteristics.
At present, 40% of the products are used in large domestic steel mills and founders, including Shagang group, Rizhao iron and steel group, Shougang group, Wuhan iron and steel group, etc.60% of the products are exported to more than 30 countries and regions such as South Korea, Japan, Russia, Ukraine, Turkey, Germany, India, Australia and Iran, including posco iron & steel group, Hyundai iron & steel group and JFE iron & steel group.With stable quality and high quality technical services, our products have won the praise and trust of customers at home and abroad.
Hope

In the future, the competition will be more intense, Henan guorui will continue to strictly comply with the requirements of iso9001:2008 quality management system, continue to focus on customer needs, committed to providing newer, better quality products and more satisfactory services for steelmaking and casting industry. Henan guorui sincerely hope to join hands with more enterprises to advance together and create brilliant.

 

Website: https://www.copper-al.com/

B14-11-8

CERTIFICATE OF QUALITY

Cd99.99)

STANDARD: YS/T72-2019

CERTIFICATE NO.: NFCD20190506001

DATE: August 11, 2019


BATCH NO.DATECHEMICAL COMPOSITION (%)
Cd≧99.998Zn≦0.0010Fe≦0.0001Cu≦0.0005Ti≦0.0010Ni≦0.0005Sn≦0.0002Pb≦0.0020Ag≦0.0005As≦0.0005Sb≦0.0002
190811August 1199.9980.00010.00010.00010.00010.00010.00010.00060.00010.00010.0001

INSPECTOR: 11 20

CONFIRMATION: Zhang Jie

5dc694262e0e2.jpg5dc694262e0e2.jpg5dc694262e0e2.jpg