Home > Products > Aluminum

Aluminum ingot

Share:

Aluminum ingot for remelting is produced by molten salt electrolysis method using alumina and cryolite. Products meet the national standard GB/T1196-2002. The surface of ingot is clean and smooth.

Introduction

Aluminum is a silver-white metal that ranks third in the earth's crust after oxygen and silicon.Aluminum is less dense, only 34.61% of iron and 30.33% of copper, so it is also called light metal.Aluminum is the world's output and usage are second only to steel non-ferrous metals.The density of aluminium is only 2.7103g/cm3, about a third of that of steel, copper or brass.Because of its light weight, aluminum is often used in the manufacture of vehicles, trains, subways, ships, airplanes, rockets, airships and other land, sea and air vehicles to reduce the dead weight and increase the loading capacity.

In our daily industrial raw materials called aluminum ingots, according to the national standard (GB/T 1196-2008) should be called "remelting with aluminum ingots", but we are used to "aluminum ingots".It is produced by electrolysis with alumina - cryolite.There are two kinds of aluminum ingots after they enter into industrial application: cast aluminum alloy and deformed aluminum alloy.Casting aluminum and aluminum alloys are castings of aluminum produced by casting method;Deformable aluminium and aluminium alloys are manufactured by means of pressure processing: plates, belts, foils, tubes, rods, moulds, wires and forgings.According to the national standard, "aluminum ingots for remelting are divided into 8 grades according to chemical composition, namely Al99.90, Al99.85, Al99.70, Al99.60, Al99.50, Al99.00, al99.7e, al99.6e" (note: the number after Al is the aluminum content).

Use

Because the material of aluminum is relatively light, aluminum ingots are widely used in construction, electricity, packaging, transportation and consumer goods and other occupations.Can be used to produce aluminum plate with foil, aluminum alloy, anti-corrosion packaging materials, also can be used for the chemical industry aluminum alloy, utensils, cables, conductive body, central alloy, decoration materials, daily provisions.

In addition, aluminum ingots can also be used with other metals such as silicon, copper, magnesium, and iron to improve the unalloyed alloys of pure aluminum in forging, chemical, and physical properties.

For example, forging aluminum - silicon (al-si) alloys.Meanwhile, the ZL101(A) alloy has been used to accept intermediate loads of miscellaneous parts, such as aircraft parts, instruments, instrument housings, engine parts, car and ship parts, cylinder bodies, pump bodies, brake drums and electrical parts.

Forging aluminum zinc (al-zn) alloy.Meanwhile, ZL401 alloy is mainly used as various pressure forging parts, working temperature is no more than 200 degrees Celsius, and the construction of shapeless car and aircraft parts.

Forging aluminum magnesium (al-mg) alloy.The ZL301 alloy is mainly used for medium load parts under corrosion or in the cold atmosphere and for parts whose working temperature does not exceed 200 degrees Celsius, such as sea wheel parts and machine shells.

Profile  

 Anyang daguan metal co., ltd. was established in 2006, specializing in the production of metallurgical accessories.After more than 10 years of efforts and development, has become a domestic rapid development, larger, stable quality, trusted by customers of the benchmark ferroalloy industry enterprises.5dc694262e0e2.jpg
     In 2012, our company obtained export license.The company has 10 sets of intermediate frequency furnace and 4 core wire production lines, with an annual output of more than 20,000 tons of auxiliary materials for steelmaking and casting.Mainly includes the ferroalloy (ferrosilicon, calcium silicon, silicon barium, calcium silicon, silicon barium aluminum, high silicon aluminum barium calcium, calcium silicon manganese, silicon, silicon carbide and carbon recarburizer), nodulizing agent (rare earth silicon magnesium alloy), nucleating agent (silicone, barium, calcium, zirconium, etc.), deoxidizer (aluminum and calcium), alloy ball (silicon, silicon, silicon carbide ball), alloy slag slag (ferrosilicon, silicon slag, rich manganese slag) and packet core.With excellent production equipment, strong technical force, advanced production technology and unique formula, the product ingredient content can be produced in strict accordance with customer requirements, in use with high efficiency, stable reaction, absorption and fusion of good characteristics.
     At present, 40% of the products are used in large domestic steel mills and founders, including Shagang group, Rizhao iron and steel group, Shougang group, Wuhan iron and steel group, etc.60% of the products are exported to more than 30 countries and regions such as South Korea, Japan, Russia, Ukraine, Turkey, Germany, India, Australia and Iran, including posco iron & steel group, Hyundai iron & steel group and JFE iron & steel group.With stable quality and high quality technical services, our products have won the praise and trust of customers at home and abroad.
Hope

In the future, the competition will be more intense, Henan guorui will continue to strictly comply with the requirements of iso9001:2008 quality management system, continue to focus on customer needs, committed to providing newer, better quality products and more satisfactory services for steelmaking and casting industry. Henan guorui sincerely hope to join hands with more enterprises to advance together and create brilliant.

 

Wbsite: https://www.copper-al.com/

Chemical Composition: al

Al (Min): 99%-99.9%

Place of Origin: China (Mainland)

Appearance: silvery white


Packaging:

About 25Kg /Ingot, Packed in wooden case, Net weight 1000Kg / Case,or as customer's requirements.

Aluminum ingot for remelting is produced by molten salt electrolysis method using alumina and cryolite. Products meet the national standard GB/T1196-2002. The surface of ingot is clean and smooth.


Applications:

1. mainly used for melting ingot 
2. discontinuous melting with scrap 
3. easy control and operation 
4. fast melting

5. Used for industry such as automobile,pinning and weaving,electron broadly and so on       

The main models are as follows: AL99.90, AL99.85, AL99.70A, AL99.70

GradeChemical Composition %
Al≥impurities ≤
SiFeCuGaMgZnMnothersSum
Al99.999.900.500.070.0050.020.010.025-0.0100.10
Al99.8599.850.800.120.0050.030.020.030-0.0150.15
Al99.799.700.100.200.0100.030.020.030-0.0300.30